Bridges

Bridges are essentially false teeth which are held together by two porcelain crowns. Bridges can replace one or more missing teeth and provide a natural look while minimizing speaking and chewing problems.

HALF PRICE will use soft moldable material to take impressions of your mouth. Our dental technician will use these to reconstruct your bite in a mold. In turn then a tooth, or teeth, can be designed that will effectively fill the gap(s) and blend in well with your natural teeth.

There are different types of bridges, depending on how they are fabricated and the way they anchor to the adjacent teeth. Conventionally, bridges are made using the indirect method of restoration however, bridges can be fabricated directly in the mouth using such materials as composite resin.

A dental bridge is fabricated by reducing the teeth on either side of the missing tooth or teeth by a preparation pattern determined by the location of the teeth and by the material from which the bridge is fabricated. In other words, the abutment teeth are reduced in size to accommodate the material to be used to restore the size and shape of the original teeth in a correct alignment and contact with the opposing teeth. The dimensions of the bridge are defined by Ante's Law: "The root surface area of the abutment teeth has to equal or surpass that of the teeth being replaced with pontics"

The materials used for the bridges include gold, porcelain fused to metal, or in the correct situation porcelain alone. The amount and type of reduction done to the abutment teeth varies slightly with the different materials used. The recipient of such a bridge must be careful to clean well under this prosthesis.

When restoring an edentulous space with a fixed partial denture that will crown the teeth adjacent to the space and bridge the gap with a pontic, or "dummy tooth", the restoration is referred to as a bridge. Besides all of the preceding information that concerns single-unit crowns, bridges possess a few additional considerations when it comes to case selection and treatment planning, tooth preparation and restoration fabrication.